Tool Kits
Brand:CABLEGIA
Crimp Style:
Material:
Selector Numbers:
Through hole Diameter:mm
Dimensions:mm
Tooling Kit including:
1. AF8 M22520/1-01 Frame crimping tool
2. TH163 M22520/1-04 Turret positoner
3. UH2-5 M22520/1-05 Universal positoner
4.G125 M22520/3-1 Universal positioner
Tooling Kit including:
1. AF8 M22520/1-01 Frame crimping tool
2. TH163 M22520/1-04 Turret positoner
3. UH2-5 M22520/1-05 Universal positoner
4.G125 M22520/3-1 Universal positioner
Features
1. Material of Mould Steel (Good Durability & Good Anti-deformation & Good appearance & Anti-rust)
2. Four-indent Crimp Tool (Crimp tension is 1.3 times that of the hexagonal crimp, more stable & more reliable)
3.8 Selector Numbers (Adjustable crimping ranges in different selector number, more convenient for wider applications)
Crimp Range
CONTACTS：12-20 #
|
Selector NO. |
Intender Working Diameter mm/INCH |
|
|
A（GO） |
B（NO GO） |
|
|
1 |
0.71/0.028 |
0.84/0.033 |
|
2 |
0.81/0.032 |
0.94/0.037 |
|
3 |
0.91/0.036 |
1.04/0.041 |
|
4 |
0.99/0.039 |
1.12/0.044 |
|
5 |
1.14/0.045 |
1.27/0.050 |
|
6 |
1.32/0.052 |
1.45/0.057 |
|
7 |
1.50/0.059 |
1.63/0.064 |
|
8 |
1.73/0.068 |
1.86/0.073 |
The crimping tool adopts curve propulsion mechanism, its applied force transfers through four curves in the head cavity of the right plier handle to the four indenters. The four intenders do the centripetal linear motion, which makes its front-end teeth crimp the contact to complete the crimping process. The cycle controlled precision ratchet assures the consistency of impression and the crimping quality of wires and contacts.
The CABLEGIA AF8, suitable to MIL-DTL-22520/1* and AS22520/1*, has virtually limitless application within the specified wire range of 12 through 26 AWG. Over a thousand turret heads are available to adapt the tool frame to your specific military or proprietary contact/wire combination. The 8 impression crimp, which is standard in the AF8, assures absolute maximum tensile strength with almost every closed barrel contact. Special indent configurations and gaging are available upon request.
For proper operation, the tool must be mated with one of the following optional accessories: a military standard or non-military turret head (TH-XXX Part No. Series), a military standard or non-military positioner (TP-XXX Part No. Series), or an adjustable head (Part No. UH2-5 TH163 G125). This is done simply by orienting the head in the keyed position, and by tightening the hex socket screws provided as part of the head.
The precision ratchet controls cycling of the tool in both directions of handle movement. This assures the same accurate crimp every time. It's like having a quality control inspector at every work station.Positive crimp depth is controlled by an 8 position selector knob conveniently located on the tool frame. The operator simply dials the desired step for the wire being used. This setting can be secured by use of a locking pin or safety wire.
A permanent dataplate is affixed to all turret heads and positioners. This plate lists specific contact part numbers, the corresponding position color code (for 3 position turret heads), and suggested selector depth settings for the wire size being used.
The AF8 is approximately 9.75" x 2.5" x 1.25" and weighs 15 oz.
If you encounter difficulties in using the tool or if the tool is getting stuck by using terminals that exceed the applicable range, please contact sales@cablegia.com, we will guide you on how to use the tool correctly and eliminate the difficulties.
Limited Warranty / Limitation of Liability*
Cablegia tool manufacturing warrants each new unit sold by it to be free from defects in material and workmanship under normal use and service. Cablegia’s obligation under this warranty is limited to the free correction or, at Cablegia's option, the refund of the purchase price of any such unit which proves defective within Ninety (90) Days after delivery to the first user, provided that the unit is returned to Cablegia with all transportation charges prepaid, and which shall appear to Cablegia's satisfaction, upon inspection by Cablegia, to have been defective in material or workmanship.
This warranty shall not cover any damage to such products, which in the opinion of Cablegia tool manufacturing, was caused by normal wear, misuse, improper operation or accident. This warranty is in lieu of all other warranties express or implied. No warranty express or implied, is made or authorized to be made or assumed with respect to products of Cablegia, other than those herein set forth. The tooling suggested within this website may not cover a user's specific contract or manufacturing requirements. It is the user's responsibility to carry out sufficient testing to verify the suitability of the Cablegia product selected for the specific requirements of each particular application. Cablegia is not liable for consequential or special damages of any nature or kind resulting from the use of any of our products. Cablegia is not liable for Consequential or Special Damages of any nature or kind resulting from the use of any of its products. Owners and users of Cablegia products assume full responsibility for instructing their employees in the proper and safe use of such products.
1 year warranty for crimp tool and 5 years warranty for tool positioner are availaible.
Returns
Material returned must be standard items produced by Cablegia, unused, in saleable condition and not more than three (3) months old. Special order or custom made items are not returnable.
Return material will be subject to a re-stocking charge up to twenty percent (20%).
Return credit must be offset by a purchase order for new Cablegia product on a dollar for dollar basis.
Contact sales@cablegia.com
